House Entry System – HE 30/9
Seals entry holes up to 50mm dia for cables or pipes,
withstands water and gas pressure up to 1 bar without
mortar |
 |
|
House Entry with Double Flange
Seals entry holes up to 50mm dia for cables and pipes, withstands
water and gas pressure up to 2 bar without mortar
New - Now with quick-action bracing
|
 |
|
Pipe Seal ‘SUMO’ HSD/HSN
Available for sizes between ID 32 – ID 210 Pressure and non-pressure
applications Wide clamping range with seal check points. Divided
profile sections allow for retro fitting
Cost effective design & quick assembly.
|
 |
|
HRD Cable Seal
Stainless steel is used in the manufacture of the pressure plates so
no magnetic field is created
Split HRD seals available for retro fitting. Bespoke size and number
of hole combinations Square, rectangle seals and overlapping flanges
also available. |
 |
Cable Channel < Snap-In-System> HD
150 / HSI 90 / HSI150
| • |
The bayonet – type connector can be used
with a single or dual packing piece |
| • |
The system cap has a matching snap
connection and fixes with an audible >click< |
| • |
The pre-mounted tensioning nut is tightened
and compresses a rubber sealing ring |
| • |
Various Interchangeable fittings
|
| • |
Connections with hot or cold shrink seals |
| • |
Gas and water pressure up to 2 bar |
| • |
Connectable to solid and corrugated pipes |
| • |
Resistant to most corrosive agents |
| • |
HRD seals are fully compatible |
|
 |
Single and Dual
Packing Piece
| • |
Supplied in accordance to wall thickness |
| • |
Supplied with foil to cover during
installation |
| • |
Interlocking tabs allow multiple assemblies |
|
 |
| • |
Highways Agency Approved Duct Sealing Plug |
| • |
Hauff Technik HRD Duct Plugs Comply with HA Specification MCH1750
(Drawing MCX 0814) |
| • |
Manufactured from Stainless Steel and EPDM Rubber - minimum 30 year
Life |
| • |
Previous installation Contracts: - M1 (3 contracts), M2, M5, M6,
M62, A1(M) (2 Contracts) in total over 20,000 Units used |
|
 |
| • |
Multiple Cable Configurations - up to 16 Cables (subject to
Diameter)
|
| • |
Plugs supplied complete with pre-installed Drain Valve and Rope Tie |
| • |
Split Plug Design for easy "one handed" installation, after cable
laying |
| • |
Can be supplied with "Blanked" Cable entries for the future
installation of additional cables |
| • |
Pressure tested up to 3 Bar |
|
 |
|
For more information
click
here |
